Some devices are missing in the LAN scanner results
There can be various reasons for this.
First, this typically happens with devices in a power-save mode such as phones, tablets or notebooks which try to preserve as much power as possible by disabling the wifi reception for short periods of time and don't respond to the probes sent by Network Analyzer. Such devices sometimes appear in the results and sometimes not.
Second, your router may have "wireless isolation" enabled (various manufacturers use a different term for this feature). If such a feature is enabled, individual devices don't see each other. Such settings is often used in public wifi networks such as hotels or airports because of security/privacy reasons. It is usually possible to disable this feature in the router's settings.
Finally, wifi routers sometimes isolate devices connected to the 2.4GHz network from devices connected to the 5GHz network so devices connected to the 2.4GHz network don't see devices connected to the 5GHz network and vice versa. Again, this can usually be configured in the router's settings.